Tealth Dental Brushless Electric Motor
Product name: Tealth internal irrigation electric motor Order Code: M2Water spray: Internal irrigation Connector: ISO strandard E-type Separated air tube & water pipe, perfect cooling system. Motor typeDirect current brushless motorVoltage
- SKU: N/A
- Category: Small Equipments & Instruments
- Subcategory: Implant & Electrical Motors
Product name: Tealth internal irrigation electric motor
Order Code: M2
Water spray: Internal irrigation
Connector: ISO strandard E-type
Separated air tube & water pipe, perfect cooling system.
| Motor type | Direct current brushless motor |
| Voltage | DC24V |
| Operation mode | REV |
| Speed | 2000-40,000 rpm |
| Torque | 3.2N·cm |
| Coolant gas | 6-8 NL/min(0.2MPa) |
| Sterilization | 121℃20 minute,or 132℃15 minute |
| Motor size | Ф22×L71mm |
| Noise | ≤60dB |
Installation
Step1: Fix motor’s control PC board directly in the dental unit’s instrument tray box, then connect a 4 holes handpiece tubing to control PC board.
Step2:Connect motor to control PC board’s motor tubing, then put the motor on the handpiece pylons.
Connect electricity to the control panel,turn on power,take out the motor,then you can control the motor by foot pedal.
Operation Instruction1.Control panel’s sign and functions
2.Turn on the switch, when light is on, the motor running .
3. Press speed adjust button to adjust speed.
4.Press REV,when light is green it is clockwise rotate; when light is orange it is anti clockwise rotate.
5. Press and hold REV button for 3 seconds to turn on or off motor.
6.This product has 3 speed rate,1:5.1:1.16:1;when use contra angle for different speed ratio,the speed display is the head’s speed ratio.Press speed rate button to choose correct rate for the head you are using,and the rate button will light on.
Warning:Do not press REV when motor is running.
Maintenance
Use alcohol to wipe the motor and control panel everyday to keep it clean.
* It is absolutely forbidden to use oxidized ionized water (strongly oxidized water, peroxide water) or disinfectant for cleaning, soaking and wiping.
| Contra angle speed rate | Speed range |
| 16:1 | 100~2500 |
| 1:1 | 2,000~40,000 |
| 1:5 | 10,000~200,000 |
1 .When O ring is broken, replace it in time.
2 .Autoclave the motor for 20 min. at 121℃ or for 15 min at 132℃.
3. Working pressure: 0.2Mpa
4. Handpiece tubing connector: 4 holes
5.Rate of cooling-air flow: 65mL/min.
6.Continuous operation for 60min, rest for 5min
* Do not use chemical disinfect.
* Clean the motor surface before autoclave .
| Brand | Tealth Medical Equipment |
| Category | Small Equipments & Instruments |
| Subcategory | Implant & Electrical Motors |
| SKU | N/A |
| Stock Status | In Stock (10 available) |
